Description
TuneZilla 3.0T TFSI ECU Tuning for Audi
Available through United Performance
TuneZilla calibrations are flashed through your vehicle’s OBD port with a FlashZilla device: read your factory file, download your chosen tune from the InstaTune server, and write it in. Switching between tunes or back to stock later uses the same tool.
Power & Torque
Factory baseline on TuneZilla’s dyno: 297 whp / 295 lb-ft — 371 hp / 368 lb-ft at the crank.
- Stage 1 — 368 whp / 346 lb-ft — 460 hp / 433 lb-ft at the crank (+71 whp / +51 lb-ft over stock)
- Stage 2 — 405 whp / 360 lb-ft — 506 hp / 450 lb-ft at the crank (+108 whp / +65 lb-ft over stock)
Figures by fuel:
- Stage 1 — 87 Octane 341 whp / 323 lb-ft — 426 hp / 404 lb-ft at the crank; 91 octane 357 whp / 340 lb-ft — 446 hp / 425 lb-ft at the crank; 93 octane 368 whp / 346 lb-ft — 460 hp / 433 lb-ft at the crank
The figure quoted for each tune above is the best of these; what your car makes depends on the fuel you run, your hardware and ambient conditions.
All figures are TuneZilla’s own published dyno results, not a United Performance measurement, and are indicative rather than guaranteed.
Available ECU Tunes:
- Stage 1 — $865.56 CAD
- Stage 2 — $1,010.06 CAD
- Stage 3 Custom — $2,455.06 CAD
Fuel & Hardware Requirements:
- Stage 1 — 91/93 Oct Required; colder-range Spark Plugs Recommended; Intake Recommended; Divorced coolant reservoir Recommended; Heat exchanger Recommended
- Stage 2 — 93 Oct / 98 RON Required; colder-range Spark Plugs Required; Supercharger Pulley Required; Divorced coolant reservoir Required; Heat exchanger Required
- Stage 3 Custom — 93 Oct / 98 RON Required; colder-range Spark Plugs Required; Supercharger Pulley Required; Throttle Body upgrade Required; Ported Supercharger Required
Transmission Tuning:
- Automatic ZF8 — Stage 1 – ZF8 TCU, add $721.06 CAD
- DSG DL501 — DSG DL501 Stage 1, add $721.06 CAD
Add-Ons (bundled pricing):
- Emissions Deletes — Remove Intake Flap, SAI, EVAP, Cat, and/or Rear O2 (add $143.06 CAD)
Fitment:
- Audi A6 3.0T TFSI 2010-2017
- Audi A7 3.0T TFSI 2012-2017
- Audi Q5 3.0T TFSI 2009-2013
- Audi S5 3.0T TFSI 2010-2017
- Audi S4 3.0T TFSI 2010-2017
- Audi SQ5 3.0T TFSI 2012-2017
- Audi A8 3.0T TFSI 2014-2016
Engine family: 3.0T Supercharged (EA837).
FlashZilla tool — the flashing device is required to load any of these files. Add it to your order from the FlashZilla Tool option above for $205.00 CAD; if you already own one, leave it set to No and only the software is supplied.
The tune itself is delivered as a software file for your own FlashZilla device — no parts ship unless you add the tool.
