Description
TuneZilla 2.0T TSI ECU Tuning for Audi/Porsche
Available through United Performance
TuneZilla calibrations are flashed through your vehicle’s OBD port with a FlashZilla device: read your factory file, download your chosen tune from the InstaTune server, and write it in. Switching between tunes or back to stock later uses the same tool.
Power & Torque
Factory baseline on TuneZilla’s dyno: 218 whp / 246 lb-ft — 252 hp / 273 lb-ft at the crank.
- Stage 1 — 269 whp / 313 lb-ft — 328 hp / 381 lb-ft at the crank (+51 whp / +67 lb-ft over stock)
- Stage 2 — 286 whp / 341 lb-ft — 348 hp / 416 lb-ft at the crank (+68 whp / +95 lb-ft over stock)
Figures by fuel:
- Stage 1 — 93 Octane 269 whp / 313 lb-ft — 328 hp / 381 lb-ft at the crank; 91 Octane 263 whp / 285 lb-ft — 320 hp / 347 lb-ft at the crank
The figure quoted for each tune above is the best of these; what your car makes depends on the fuel you run, your hardware and ambient conditions.
All figures are TuneZilla’s own published dyno results, not a United Performance measurement, and are indicative rather than guaranteed.
Available ECU Tunes:
- Stage 1 — $721.06 CAD
- Stage 2 — $865.56 CAD
- Custom Tuning — $2,455.06 CAD
Fuel & Hardware Requirements:
- Stage 1 — Minimum 91 Oct / 95 RON Required; DSG Tune Recommended
- Stage 2 — Minimum 93 Oct / 98 RON Required; Downpipe Upgrade Required; Intercooler Upgrade Required; DSG Tune Required; Intake Recommended; 91 octane supported via support ticket
- Custom Tuning — Supported hardware upgrades: fuelling upgrades, turbo upgrade (hybrid or larger), downpipe upgrade, intercooler upgrade, engine swap
Transmission Tuning:
- DSG DL382 — DSG DL382 Stage 1&2, add $576.56 CAD
- DSG DL382 — DSG DL382 Stage 3 (upgraded clutches), add $793.31 CAD
Fitment:
- Audi A6 2.0T TSI 2016-2020
- Audi Q5 2.0T TSI 2017-2020
- Audi Q7 2.0T TSI 2017-2019
- Porsche Macan 2.0T TSI 2015-2022
FlashZilla tool — the flashing device is required to load any of these files. Add it to your order from the FlashZilla Tool option above for $205.00 CAD; if you already own one, leave it set to No and only the software is supplied.
The tune itself is delivered as a software file for your own FlashZilla device — no parts ship unless you add the tool.
