Description
The RED Package Bundle for the Audi 4.0T EA824 twin-turbo V8 platform is a fully integrated performance system engineered to transform the factory airflow architecture into a high-efficiency, high-output configuration.
Designed specifically for the Audi A8, S8, S6, S7, RS6, and RS7 equipped with the 4.0T twin-turbocharged V8, this package addresses the three primary performance constraints of the OEM setup:
• Intake airflow restriction
• Exhaust backpressure after the turbochargers
• Charge-air temperature instability under sustained boost
Once these airflow limitations are corrected, the ECU calibration optimizes boost control, ignition timing, and torque management across the entire operating range.
The result is a dramatic increase in torque density, sharper turbo response, stronger mid-range acceleration, and sustained top-end performance — all while preserving smooth drivability and OEM-level refinement expected from Audi’s flagship V8 models.
This is not a collection of parts — it is a calibrated system.
Cold Air Intake Systems
Increased Turbo Efficiency & Airflow Stability
The factory intake system is engineered for NVH reduction and emissions compliance. While effective for stock output levels, it introduces measurable restriction under elevated boost pressures.
Upgraded intake systems improve compressor efficiency by reducing pressure drop before the turbochargers, allowing faster spool and more stable airflow at higher RPM.
Available Options
AWE Carbon Fiber Intake System
A precision-molded carbon fiber intake designed for thermal resistance and structural rigidity under high load. The system balances airflow performance with heat shielding to maintain consistent intake air temperatures while enhancing induction acoustics.
Untd. Performance High-Flow Intake System
An open-flow, performance-oriented intake engineered to maximize volumetric efficiency and reduce airflow turbulence at higher boost levels.
Performance Contribution (Supporting Modification When Tuned)
• +10–25 HP (application dependent)
• +10–20 lb-ft torque
• Improved twin-turbo spool characteristics
• Sharper throttle response
• Enhanced induction sound
While intake upgrades alone offer modest peak gains, they are critical for supporting Stage 2 and higher boost calibrations.
Downpipe Systems
Reduced Backpressure & Accelerated Twin-Turbo Response
The factory downpipes contain restrictive catalytic elements positioned immediately after each turbocharger. This creates exhaust backpressure that limits turbine efficiency and delays boost response.
Upgrading the downpipes significantly improves exhaust flow, allowing the twin turbos to reach target boost more quickly and maintain higher efficiency at elevated RPM.
Available Configurations
Untd. Performance Catless Downpipes
Untd. Performance Catless with Integrated Heat Shielding
Untd. Performance 200-Cell High-Flow Catalytic Downpipes
Untd. Performance 200-Cell High-Flow with Integrated Heat Shielding
Catless Configuration
Delivers maximum exhaust flow and the strongest overall performance gains. Designed for off-road use where regulations permit. Provides the fastest spool and highest top-end power potential.
200-Cell High-Flow Catalytic Configuration
Maintains a balance between performance and emissions considerations. Significantly reduces restriction compared to OEM while preserving a more refined exhaust tone.
Heat Shield Variants
Integrated thermal shielding reduces engine bay heat transfer. Power output remains unchanged but improves long-term component protection.
Performance Contribution (With Stage 2 Calibration)
Compared to Stage 1 configuration:
• +32–77 HP increase
• +41–84 lb-ft additional torque
• Substantially stronger mid-range acceleration
• Improved high-RPM pull
For the 4.0T EA824 platform, downpipes are the defining hardware requirement for full Stage 2 performance capability.
Intercooler Systems
Thermal Stability Under Sustained Boost
The twin-turbo 4.0T generates significant charge heat under aggressive driving. The factory cooling system can become heat-soaked during repeated acceleration or high-speed operation, reducing ignition timing and power consistency.
Upgrading the intercooler ensures stable intake air temperatures and preserves full ignition advance under load.
Available Option
Wagner Tuning Performance Intercooler System
Wagner Tuning intercoolers are engineered with high-density bar-and-plate cores designed to significantly increase cooling surface area while minimizing pressure drop. Precision end tank design ensures even airflow distribution across the core, optimizing charge-air cooling efficiency under high boost conditions.
These systems are specifically developed for the Audi 4.0T platform and are tested for durability under sustained thermal load.
Performance Contribution
• Maintains peak horsepower during repeated acceleration
• Dramatically reduces heat soak
• Stabilizes boost pressure under high load
• Supports full Stage 2 and higher torque output
Intercooler upgrades do not independently increase peak horsepower but are critical for maintaining performance consistency — especially in heavier executive chassis platforms and high-speed driving conditions.
ECU Calibration Options
Optimized Boost, Ignition Timing & Torque Management
The ECU calibration unlocks the true capability of the 4.0T EA824 platform by coordinating airflow upgrades with refined boost control and torque mapping.
Stage 1 Calibration
(Compatible with Stock Downpipes)
Available Options:
• IE Performance Stage 1
• Jackal Motorsport Stage 1
• TuneZilla Stage 1
Estimated Output (93 Octane Fuel – S6/S7 Platform Example)
• 522–580 HP
• 626–700 lb-ft torque
Estimated Gains Over Stock
• +82–120 HP
• +126–180 lb-ft torque
Stage 1 dramatically increases low- and mid-range torque while maintaining factory exhaust components and smooth drivability.
Stage 2 Calibration
(Requires High-Flow or Catless Downpipes)
Available Options:
• IE Performance Stage 2
• Jackal Motorsport Stage 2
• TuneZilla Stage 2
Stage 2 with 200-Cell High-Flow Downpipes
• 600–680+ HP (model dependent)
• 700–800+ lb-ft torque
Provides aggressive mid-range acceleration with refined drivability characteristics.
Stage 2 with Catless Downpipes
• 630–720+ HP (model dependent)
• 750–850+ lb-ft torque
Delivers maximum airflow efficiency and the most aggressive acceleration characteristics within the limits of the factory turbochargers.
(RS6/RS7 variants will produce higher baseline and tuned output due to factory turbo sizing and calibration differences.)
Driving Characteristics After Installation
With the RED Package Bundle installed:
• Earlier twin-turbo spool
• Dramatically stronger mid-range torque
• Effortless highway acceleration
• Immediate and precise throttle mapping
• Smooth, linear power delivery
• Consistent performance under repeated load
The 4.0T EA824 platform responds exceptionally well to airflow and calibration improvements, making it one of Audi’s most rewarding V8 engines to upgrade while retaining factory turbochargers.
Intended Application
Ideal for:
• High-performance daily drivers
• Executive sedan owners seeking supercar-level acceleration
• Enthusiasts targeting 600–700+ HP capability
• Drivers demanding consistent power under sustained load
• Owners preparing for future turbocharger upgrades
Important Considerations
• Power figures vary by model (A8, S8, S6, S7, RS6, RS7), fuel quality, elevation, and climate.
• Catless downpipes may not be emissions compliant for street use in certain regions.
• Professional installation is strongly recommended.
