-
All Categories
- All Products
- Cooling
- Drivetrain
- Engine
- Exhaust System
- Exterior
- Forced Induction
- Untd. Performace Catless Downpipe - Audi A3 2.0T TT Mk2 - VW GOLF 2.0T MK5 MK6
- Untd. Performance Catless After Downpipe - Porsche Panamera 971 2.9T 2018
-
- Highly efficient bar & plate intercooler core constructed of T5052 Aluminum
- Drastically reduces charge air temperature for cooler, more dense air
- Significantly more resistant to heat-soak
- Over 60% more volume than OEM intercooler
- T6061 cast Aluminum end tanks
- Weight 24.4 lbs
- Direct OEM replacement; no bumper, radiator support, or other trimming required.
- Hardware Included
- Direct Fit Intercooler Core for the MK8 GTI and Golf R equipped with the 2.0TSI EVO4 engines.
-
- Horsepower capacity: 300-550 hp +
- Core length: 24″
- Core height: 16″
- Core thickness 2.5”
- Inlet / outlet : 2.36″
- End to end length: 28-36″
- Made of high quality durable T-6061 aluminum
- Includes Silicone Hoses
-
- Increased air flow
- Powder Coated in Black With Wrinkles
- Can be used with OEM or the Untd. Performance intercooler
- 1/8” NPT Water/Meth injection port w/ plug
- Direct bolt-on installation
- Optimized flow geometry
- Includes all hardware necessary
-
Product Info and Spec:
Bar & Plate Construction
Core Size: 8″x7.5″x3.5″
2″ Inlet & OutletHighlights:
– Working Pressure: 5~50PSI
– Pressure Drop:2~5psi@35psi; 0.2~0.5psi@15psi
– Hot Air Temperature: 32°F~302°F (0°C~150°C)
– Material: 100% Aluminum, Bar and Plate Design, Polished
– Construction: Machine Cut and Stamped, Hand Welded -
- Max Horsepower Capacity: 300-600hp
- Core Length: 22″
- Core Height: 16″
- Core Thickness: 2.5″
- Inlet: 2.30″ / Outlet: 2.60″
- End to End Length: approximately 40″
-
- Dimensions stock Intercooler:
640mm x 163mm x 80mm
V=8,3 Liter
A=1043 cm² - Dimensions Evo1 intercooler:
660mm x 180mm x 110mm
V=13,07 Liter
A=1188 cm² - Direct Bolt on RS3 8V – TTRS 8S
- Dimensions stock Intercooler:
-
‘- significantly better cooling performance
– less pressure drop
– more power and torque for your engine
– mechanical discharge of the turbocharger
– 100% pressure resistance
– 100% Plug and Play
– up to 4 years warranty
– including Ø75mm (2,25 Inch) boost-pipe
– optionally with 2pcs 1/8NPT WMI-ports inside the upper endtankcore dimensions stock intercooler:
200 mm x 207 mm x 65 mm
V = 2,7 Litercore dimensions Untd. Performance intercooler:
222 mm x 297 mm x 95 mm
V = 6,3 Liter (+133%) -
- Bar & Plate Core Design
- Fully Cast End Tanks
- OEM Fitment with Integrated Crash bar
- Intercooler Pipes Included
- Up to 80% Increased Core Volume
- Over 55ºC Lower AIT
- Direct Bolt on RS3 8V – TTRS 8S
-
- Core Size, 25″ X 9″ X 3.5″
- Overall length 28″ / Outer lip to Outer lip
- Highest point measures 14.20″ in height
- Lowest point measures 12.5″ in height
- Right down the middle in height measures 12″
- 1-3″ outlet and 2-2.5″ inlets
- 1950 CFM flow rate
- 1300 HP efficient
-
- Horsepower capacity: 200-450 hp +
- Core length: 24″
- Core height: 16″
- Core thickness 2.1”
- Inlet / outlet : 2.36″
- End to end length: 28-36″
- Made of high quality durable T-6061 aluminum
- Includes Silicone Hoses
-
- Reduced intake temperatures and air turbulence
- Increased air flow capacity
- Gains of up to 13 WHP and 10 Ft-Lbs WTQ (Stock Tuned)
- Up to 40% improved intercooler efficiency
- Reduced intake temps by as much as 65*F during solid state WOT loading
- Pressure drop reduced by 52%
- Cast aluminum intercooler end tanks
-
‘- significantly better cooling performance
– less pressure drop
– more power and torque for your engine
– mechanical discharge of the turbocharger
– 100% pressure resistance
– 100% Plug and Play
– up to 4 years warranty
– including Ø75mm (2,25 Inch) boost-pipe
– optionally with 2pcs 1/8NPT WMI-ports inside the upper endtankcore dimensions stock intercooler:
200 mm x 207 mm x 65 mm
V = 2,7 Litercore dimensions Untd. Performance intercooler:
222 mm x 297 mm x 95 mm
V = 6,3 Liter (+133%)